Skip to main content

LVM + dm-cache (unencrypted)

NOTE: This partition scheme is tailored towards a desktop computer setup with enough RAM and no SWAP (and therefore no hibernate/suspend-to-disk support).

CAUTION: This setup does NOT utilize LUKS disk encryption.

LVM cache combines the benefits of a fast mass storage device (e.g. SSD) with a slow mass storage device (HDD), utilizing the former as a read/write cache for the latter. This allows the system to manage blocks of data in a way such that often used blocks are kept on the fast cache device, making the whole system a lot more responsive. Over time the cache device fills up with frequently accessed data and the system accesses the cache device more often than the origin device (the HDD). This can be used to cost-effectively speed up an inexpensive large storage device (think Apple Fusion Drive).

This guide assumes the following:

  • /dev/nvme0n1 is the primary disk (cache device)
  • /dev/sda is the secondary disk (origin device)

Nomenclature

Term Description
Physical Volume (PV) On-disk partitioning format to be combined in a VG to a common storage pool
Volume Group (VG) Grouping of one or more PVs to provide a combined storage pool from which storage can be requested in the form of LVs.
Logical Volume (LV) Logical partition format which can be accessed like a block device to hold file systems and data.

Preparing the cache device

First the available disks need to be determined. This can easily be achieved with fdisk:

fdisk -l

To start the actual partitioning process start cfdisk and point it to the disk you wish to partition:

WARNING: Make sure to select your actually desired device!

cfdisk /dev/nvme0n1

Partition the disk in the following way:

FS Type Size Mount Point Comment
vfat 1G /boot EFI System
LVM (remaining) Linux LVM

Preparing the origin device

Partition the disk by starting cfdisk and pointing it to the disk for the origin device:

WARNING: Make sure to select your actually desired device!

cfdisk /dev/sda

Partition the disk in the following way:

FS Type Size Mount Point Comment
LVM (all) Linux LVM

Creating physical volumes, volume group and logical volumes

To create physical volumes as the basis for the LVM setup, use pvcreate and point it to the partitions you created in the two previous steps:

pvcreate /dev/nvme0n1p2   # SSD
pvcreate /dev/sda1        # HDD

Continue by creating a volume group with vgcreate that spans both physical volumes you just created:

NOTE: vg0 is used as an example here. Use whatever you like.

vgcreate vg0 /dev/nvme0n1p2 /dev/sda1

Next, create logical volumes inside the volume group with lvcreate, using 100% of the available space on the HDD and specifying the cache pool on the SSD:

lvcreate -l 100%FREE -n lv_root vg0 /dev/sda1
lvcreate --type cache-pool -n lv_cache -l 100%FREE vg0 /dev/nvme0n1p2

lvconvert --type cache --cachepool vg0/lv_cache vg0/lv_root

Formatting devices

Format the partitions with the appropriate mkfs subcommand:

mkfs.fat -F 32 /dev/nvme0n1p1        # EFI System Partition
mkfs.btrfs /dev/mapper/vg0-lv_root   # Btrfs root file system

Mount the root Btrfs file system:

mount /dev/mapper/vg0-lv_root /mnt

Next, create the subvolumes with the btrfs user space tools:

btrfs subvolume create /mnt/@
btrfs subvolume create /mnt/@home

Unmount the root file system again:

umount -R /mnt

Mount the @ subvolume at /mnt:

mount /dev/mapper/vg0-lv_root -o noatime,compress-force=zstd,space_cache=v2,subvol=@ /mnt

Create directories for subsequent mount points:

mkdir -p /mnt/{boot,home}

Mount the remaining file systems:

mount /dev/nvme0n1p1 /mnt/boot
mount /dev/mapper/vg0-lv_root -o noatime,compress-force=zstd,space_cache=v2,subvol=@home /mnt/home
Back to top